MooR FasTŪ helps you lasso cleats and bollards too!

      
There will be times when it may be awkward or impossible to try to thread a line through a cleat - there could be other mooring lines already there, it may not have a centre hole, the angle may be wrong or the mooring itself might simply be a large post or bollard. But the MooR FasTŪ can also help you to lasso or guide your mooring line over or around a cleat, bollard or post from the safety of your deck and bring it back on board.
Equally useful, you can use the
MooR FasTŪ to simply lift it off again when you want to go. Our pictures below show how helpful this feature is when dealing with a lock by utilising a pre-tied loop. The same method can be used for a loop or length of mooring line with the extra advantage that both ends are left aboard.
       

TIP: A LARGE, OPEN LOOP IS EASIER TO GUIDE OVER THE CLEAT OR BOLLARD
          
TIP: IN A LOCK, DROP OR GUIDE A MOORING LINE OVER OR AROUND THE CLEAT. WHEN IT IS TIME TO GO, USE THE MooR FasTŪ TO LIFT IT OFF. BOTH MANOEUVERS CAN BE DONE FROM THE DECK. WITH 2 METRES OF REACH, YOU CAN ALSO PASS A LINE UP A LOCK WALL OR ACROSS TO ANOTHER BOAT. MooR FasTŪ CAN ATTACH TO LADDERS, RINGS AND CHAINS TOO.

home | how it works | shop | contact | stockists | gallery | affiliates | about us/news | testimonials | FAQs

© MooR FasT (Marine) Ltd 2007

website design by: R'n'B Systems